Household Tile Floor Anti slip Floor Coating
Published by:2026-2-7 Categories: Floor Paint Viewed by: 70 times Key attributesPlace of Origin
Zhejiang, China
Main Raw Material
Modified emulsion
Usage
Natural stone or hard tile surface coating
Model Number
antiskid agent
Brand Name
baodi
Application Method
Brush
State
Liquid Coating
Product Name
China supplier anti slip floor coating solid and firm for ceramic tile
Application
Natural stone or hard tile surface coating
Color
transparent
Keywords
anti slip floor coating
Feature
Eco-friendly
Use
Tile floor
Weight
500ML/2.5kg/5KG/25KG
HOW TO USE ANTISKID AGENT? 1. Clean the floor, clean the floor, remove the dirt from the floor, wipe the water on the floor and wait for it to dry completely. 2. Start the construction, pour the anti-skid agent on the dry ground, and evenly spread the anti-skid agent with a brush or flat mop to ensure a certain thickness. 3. Wash the ground and wait for 20-30 minutes. Large area can be washed with a large amount of water. Small area can be cleaned and dried with mop. 4. After the completion of the construction, you can walk or use water for testing.
CONSTRUCTION PRECAUTIONS: 1. The antiskid agent construction must be done according to the requirements, and can not be taken for granted according to their own ideas, otherwise the antiskid effect may be reduced and the service life will be weakened. 2. Special attention: in the construction process, the antiskid agent must not stay on the ground for too long, and the ground must be cleaned in time (or dragged repeatedly). The wet bubble time of construction must not exceed 30 minutes. Generally, the ground will be cleaned in 20-30 minutes, otherwise, the antiskid agent may remain on the ground and form white traces (it will take a long time to completely disappear). 3. Some customers think that the longer the soaking time is, the better. Some customers think that the cleaning effect will be better if the ground needs to be dried. Some customers even don't clean the foundation. These ideas are wrong. Only according to the requirements of construction effect and life can the ideal state be achieved. 4. For large-scale construction, customers should pay attention to the cleaning of the first construction place (wet mop can be used repeatedly). They can't wait until all the construction is completed, which may make the soaking time of the first construction place longer. 5. Especially bright tiles (such as high gloss glazed tiles and vitrified tiles) need to be diluted with 20% ~ 30% water before use. If they are used directly without water, it may have a certain impact on the beauty and gloss of tiles! 6. there is a layer of wax oil on the surface of the new tile. Any liquid can not be painted. We only need to add a little detergent to the antiskid agent so that a lot of bubbles can be produced by the antiskid agent, because the foam will stay on the tiles and will not shrink and flow away. 7. This product will produce a little sub gloss effect on the surface of individual bright tiles, so please test it in the hidden place before using it. 8. During construction, please wear gloves. The skin should not be in direct contact with antiskid agent. In case of accidental contact, please wash it with plenty of soapy water. 9. If it gets into the eye, please wash it with clean water and see a doctor in time. 10. Please keep this product out of reach of children and pets. |
|
About us |
Product Categories | Contact way Address:No. 268, Hongchang Road, Hongqiao Town, Huzhou, Zhejiang, ChinaZhejiang Province |
| Copyright © 2020 Changxing Baodi Environmental Protection Technology Co., Ltd all reserved | Web Admin --> >> |